Moulding
EVA or TPE sheet is heated, drawn into a steel tool and trimmed by hand, with wall thickness checked at three points on the arch.
Custom mouth guard manufacturing for brands, clubs and distributors, run from one factory in Dongguan. We mould EVA, TPE and transparent shells on 260+ tools, print your artwork, mould the case and pack the carton. Minimum order is 100 pieces per style, sampling takes 5 to 7 days, and production runs 12 to 18 days after you approve the sample.
We mould mouth guards in Dalingshan, Dongguan, in a 120-person plant that runs 260+ steel tools and ships 300,000 pieces a month to buyers in 35+ countries. Shells are drawn from food-grade EVA, TPE or transparent EVA sheet at 3.0 mm to 5.5 mm, printed in one to four colours, then cased and cartoned in the same building. A 100-piece trial and a 30,000-piece team programme run on the same tools and the same inspection sheet.
Tooling decides your launch date, so we quote it plainly. If your shell already exists in our library there is no tooling charge and sampling starts on artwork approval. A new arch costs US$600 to US$1,800 and takes 12 to 18 days to cut. The tool is invoiced to you once and stays yours, held in our rack, so a reorder does not pay for it a second time.
Nothing is subcontracted, which keeps the dates and the colour match inside our control.
EVA or TPE sheet is heated, drawn into a steel tool and trimmed by hand, with wall thickness checked at three points on the arch.
One to four colours per shell, or a full-colour heat-transfer wrap, with plates cut from your artwork and kept on file.
The vented polypropylene case is moulded in-house at 82 × 72 × 32 mm, so the case and the shell share a colour batch.
Tether riveting, case pairing, polybag or printed sleeve, then 300 pieces per carton with a line-by-line packing list.
Wall thickness is the number that decides whether a guard fits and lasts. We hold it to ±0.2 mm and measure the front, mid-arch and rear of every batch against the signed sample, with an inline check every 50 pieces. A shell under 3.0 mm at the front goes back to the press rather than into your carton. That check is logged against the batch number, so the measurement exists if a buyer ever asks.
The final inspection runs to AQL 2.5 and photographs the defect classes buyers ask about: edge burrs, print registration, hinge stiffness and colour drift. Tether batches get a 50 N pull test, and bonded double-layer shells sit in 40 °C water for 48 hours to prove the seam. You receive the report with the shipping documents, not after the container sails.
You choose from food-grade EVA, TPE and transparent EVA, with an optional gel liner and a TPU tether. EVA is the default for retail because it fits at 75 °C and holds its shape in a hot kit bag. TPE fits at 70 °C in about 40 seconds and needs no trimming. All three grades are phthalate-free, and each comes with a material declaration from its supplier.
Compliance is a document question rather than a slogan. We issue a phthalate-free statement, a REACH SVHC declaration and the material supplier test report on request, and the AQL 2.5 report travels with the shipping documents. Where a market needs its own mark, we tell you what the factory can support and what has to be handled by your importer at the destination.
Four typical programmes, each produced on a tool that already exists in the library.
4.0 mm EVA, black
5.0 mm, two colours
Two-colour logo
Case matched to shell
Most first orders ship 25 to 35 days after the artwork is approved.
Share the shell, colours, quantity and artwork. A costed quotation and a sampling date come back within 6 working hours.
We mould 1 to 3 shells in 5 to 7 days. You check fit, colour and print, then sign the sample off.
A 30% deposit confirms the order. Colour recipes and print plates are locked to your account code at that point.
Production runs 12 to 18 days, with an inline thickness check every 50 pieces and progress photos halfway through.
AQL 2.5 inspection with photos, 300 pieces per carton, then FOB Shenzhen or Yantian, CIF or DDP.
Per piece, FOB Shenzhen, single-layer 3.0 mm EVA shell with one pad-print colour. A 100-piece order starts at $0.95/pc. Freight and tooling are quoted separately.
from $0.72/pc
300 pcs of one shell with one print colour, polybag packing and a signed sample before bulk.
$0.55/pc
1,000 pcs, two print colours and a vented case moulded in your own colour, packed in polybags.
from $0.42/pc
5,000 pcs and up, with scheduled monthly releases planned against a rolling forecast you control.
Tell us the shape, the colour and the quantity. You get a per-piece price, a sampling date and a tooling answer within 6 working hours.
Send your reference, quantity and target price. We reply with a quotation and a sampling date within 6 working hours.