Pad print
One to four colours on the buccal face or the case, with a plate per colour kept on file.
A logo on a mouth guard is a printing job before it is a moulding job. We pad print one to four colours on a curved shell, wrap full-colour artwork where the design needs it, and print the case to match. Plates cost US$35 to US$60 per colour, sampling takes 5 to 7 days, and the minimum is 100 pieces.
Pad printing lays a thin, flexible ink film into a curved surface, which is why it holds on an EVA shell that flexes every time it is fitted. We print one to four colours, cure each pass at 60 °C, and check registration at ±0.5 mm against the approved proof. A logo on the occlusal surface always wears first, so we print the buccal face and the case instead.
For artwork with gradients, halftones or more than four colours, a heat-transfer wrap is the better route. The wrap is applied at 150 °C in a 90-second press cycle, carries a full-colour image with no plate cost per colour, and 100 pieces is a viable wrap run. Both methods run on the same shell, so the choice is a decoration decision rather than a tooling one.
Pick the method from the artwork, not the other way round.
One to four colours on the buccal face or the case, with a plate per colour kept on file.
Full-colour artwork, gradients and player names, applied at 150 °C around the arch in a single press pass.
A logo machined into the case insert or embossed into the tool for a mark that cannot rub off.
Names and squad numbers printed per shell in squad order, then bagged and labelled by size for the kit manager.
Send vector artwork as AI, EPS or PDF with fonts outlined. A 300 dpi PNG works for a wrap but not for a plate. We return a proof at actual size on a flat template within 2 working days, then a second proof on a moulded shell photograph taken at 45 degrees, because a logo that reads well flat can vanish where the shell curves away at the rear.
Three problems account for most reprints: text under 6 pt filling in, a two-colour logo losing its gap in the wrap press, and a white underlay missing behind a light ink on a dark shell. We check all three at proof stage and tell you the fix before a plate is cut, which is cheaper than discovering it on 5,000 shells.
A pad-print plate is a one-off cost: US$35 to US$60 per colour, cut in 2 to 3 working days and archived under your account. A wrap needs a print file rather than a plate, so a twelve-colour crest costs the same to set up as a two-colour one, and a 100-piece run stops being uneconomic.
Team orders add a fourth variable: personalisation. Names and numbers are printed per shell in squad order, then bagged and labelled by size, so the kit manager hands out a box rather than sorting 300 guards the night before a match. Send the squad list as a spreadsheet and we print from that file directly.
Pad print, wrap and moulded marks from recent club and retail orders.
Two colours, 4.0 mm
Photographic artwork
Printed per shell
Moulded insert mark
A vector file, the target position and the quantity. We check printability and reply within 6 working hours.
You approve a flat proof and a shell photo proof, then plates are cut in 2 to 3 days.
Printed production shells arrive in 5 to 7 days for colour and registration sign-off.
Bulk printing and packing run 12 to 18 days, with registration checked every 50 pieces.
AQL 2.5 inspection, 300 pieces per carton, then FOB Shenzhen or Yantian with plates held on file.
Per piece, FOB Shenzhen, 3.0 mm EVA shell with one pad-print colour on the buccal face and polybag packing. Plates and freight quoted separately.
from $0.76/pc
300 pcs, one print colour on the buccal face, with a plate from US$35 and a matched polybag.
$0.58/pc
1,000 pcs, two print colours and a vented case colour-matched to the shell in the same run.
from $0.45/pc
5,000 pcs across colourways, with plates, proofs and the signed sample held on file for next season.
A vector file and a target position is enough. You get a proof, a plate cost and a per-piece price within 6 working hours.
Send your reference, quantity and target price. We reply with a quotation and a sampling date within 6 working hours.